Network diagrams for different types of configurations

How to use JanusPA

Step 1: Connect your PC or network switch.

If you are connecting directly to a PC, you'll need to use a CROSSOVER CAT5 cable.
If you are connecting to a switch to support multiple PCs, then use a regular PATCH CAT5 cable.

Step 2: Connect to your Cable/DSL modem or router.

Can be plugged directly into a Cable/DSL modem or router. This port must be connected to the Internet, not your PC or LAN.

Step 3: Connect the power to a USB port or AC power.

Usually takes 60 seconds to be fully operational.